Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Cables

$6.99 - $54.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
$54.99
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease
$53.00
- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability - Compressionless linear strand housing with slick lube liner for reduced friction - Lightweight sealed alloy end caps and alloy cable tips - Compatible with Shimano/SRAM road and MTB shifters Contents: - 1x - 1.1mm x 1500mm cable - 1x - 1.1mm x 2300mm cable - 2.7m - Compression-less 4mm housing - 8x - Black sealed alloy end caps - 2x - Black dirt guard alloy end caps w/ rubber boots - 2x - Black alloy cable tips - 2x - Black rubber cable donuts - 2x - Black rotating hooks
$53.00
- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability - Kevlar reinforced compressionless linear strand housing with slick lube liner improves lever feel - Lightweight alloy end caps and cable tips - Compatible with Shimano/SRAM road and MTB brake levers Contents: - 1x - 1.5mm x 1350mm cable - 1x - 1.5mm x 2350mm cable - 3m - Compression-less 5mm housing - 2x - EZ-bend housing segments - 6x - Black alloy end caps - 2x - Black alloy end caps for small frame fittings - 2x - Black alloy cable tips - 2x - Black rubber cable donuts - 2x - Black rotating hooks
$29.99 - $44.99
Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.5mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant
$42.00
Giant's UltraSlick Derailleur Cable Kit has the parts you need to get your bike shifting smoother than ever. Includes: - 2 Teflon-coated stainless steel shift cables - 1.8 meters of pre-lubricated, lined derailleur housing - All required cable ends and ferrules
$40.00 - $42.00
Hose kits for Hayes hydraulic disc brakes include stiff, durable hose and the necessary fittings.
$34.99
The Jagwire Pro Shift kit is a great way to upgrade from OEM cables and housing. Slick polished cables reduce friction and deliver long lasting performance, and continuously lubricated Slick-Lube liners provide precise cable movement. - Pro Slick Polished inner cables reduce friction and have no coating to wear off - Continuously lubricated LEX-SL linear-strand provides consistent, compressionless performance - Inner cables, housing, and small parts necessary for installation on a road or mountain bike are included - Includes longer cables and extra housing for compatibility with most large frames and bikes with continuous housing - Available in a wide range of colors to match Jagwire Pro Brake and Hydraulic Hose kits - Single-ended SRAM/Shimano compatible cable ends are weld-cut for easy installation
$34.99
Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes
$25.99 - $32.99
Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.1mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant
$21.99
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$19.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
$18.00
- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability - Compatible with Shimano/SRAM road and MTB shifters - Pre-stretched for more responsive braking - 1.1mm x 2300mm
$17.00
- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability - Double ended for Shimano/SRAM road and MTB brake levers - Pre-stretched for more responsive braking - 1.5mm x 1700mm
$15.99 - $16.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$14.99
- Replacement cable for the Jagwire Pro Dropper kit - 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables - An easy way to reduce the force required to activate a dropper post remote lever - Perfect for dropper seatposts with "stealth" cable routing and tight housing bends - Includes 2x heat-shrink shims - For use with dropper seatposts ONLY - Length: 2000mm
$5.99 - $14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
$14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1
$5.99 - $14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$5.49 - $14.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$12.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$12.99
Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 2300mm liners
$12.99
Jagwire's Sport Slick Teflon Shift Cable is made of stainless steel and coated with Teflon for excellent corrosion resistance, durability and a super-smooth shift every time. It's a nice upgrade for your shift cables.
$12.99
This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology. - Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated. - Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008. - Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables. - Gyro lug included at one end of the inner wire for use with detanglers. - 60-65mm in length. - Black
$11.99
Shifting cables for Road/Mountain bikes.
$9.99
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.
$3.50 - $9.99
The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length
$9.99
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
$9.99
- Hydraulic Disc Brake Hose Fitting Kit - Includes 5 threaded hosebarbs, 5 red comp fittings, 1 T8 Torx - Compatible with Stealthamajig and standard levers
$9.50
Giant's Teflon-coated stainless steel derailleur cable assures lightning-fast shifts and is pre-stretched for high responsiveness. This galvanized cable is double ended for use with Campagnolo or Shimano/SRAM drivetrains.
Page 1 of 2 Next page