Other

- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts - Clamp Size: 25.4mm - Material: Alloy

Campagnolo small parts for bottom brackets.

- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries

Campagnolo EKAR disc brake adapters. - Includes bolts

Alloy braze-on adaptor clamps are designed to work with all Campagnolo braze-on front derailleurs

EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.

Campagnolo Cassette Lockrings. - Fits 2000 and newer Campagnolo wheels - Fits all Fulcrum wheels - Fits 1999 Record/Chorus hubs and all Campy hubs 2000-newer - 27.0mm thread OD - For use only with Campagnolo 11-speed cassettes with 12 tooth first position cogs

- Required for charging Campagnolo V2 and V3 Power Units - Not compatible with Campagnolo V1 Power Unit

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets. - Cane Creek Hellbender Bearing, 41mm SHIS

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 30mm - Outer Diameter: 42mm - Width: 7mm

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 15.4mm, for ratchet

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 3 Pawl Ring Nut

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss EXP 54 Tooth Upgrade Kit

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

Heavy duty bolt-on aluminum seatpost clamp.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Grade 10 chromium steel balls

- Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity