Other

Giant's Connect SL U-Bend Carbon Aerobar Extension is for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the U-Bend. Thanks to carbon construction, this is a featherweight and super-stiff bar. Plus, it has 70mm of fore/aft adjustment to dial in your ideal aero position.

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 30mm - Outer Diameter: 42mm - Width: 7mm

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

T4 Plus Aluminum Aerobars with high-performance shallow ski-bend extensions offer a single wrist angle with low extension height for a more aerodynamic position. Includes anatomic F-19 Armrest. - J2 Bracket: The extension bracket, isolated from the basebar bracket, allows for a wider range of armest adjustment possibilities. Easily adjustable in length and angular rotation for a customized fit. - F-19a Aluminum Armrest: 4 position fore/aft adjustment along with 15-degrees of rotational adjustment to dial in the fit. Velcro-backed EVA foam pads affix directly to armrest without additional straps. - Ability to increase stack up to 80mm with optional Aerobar Bracket Riser Kit. Tech specs: - Bracket: J2 Bracket - Armrest: F-19a Aluminum Armrest - Stack: 60mm-120mm - Reach: Max Aft -180mm, Max Fore 70mm - Extension Adjustment: 125mm-275mm (center of basebar-end) - Width: 145mm-300mm (center to center) - Center Clamp Diameter: Fits 26.0mm and 31.8mm bars - Weight: 469g

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss EXP 54 Tooth Upgrade Kit

Giant's Connect SL S-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the S-Bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.

- Accessory base plate to mount EnergyPak Plus on the bike. - EnergyPak Plus accessory comes with a water bottle cage adaptor plate that can be mounted to the base plate when the EnergyPak Plus is not in use.

- Required for charging Campagnolo V2 and V3 Power Units - Not compatible with Campagnolo V1 Power Unit

-Seatpost clamp for Propel Advanced ISP models (2013-2016)

ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs

The ReMote BarCentric is a dropper lever option for bikes with front shifters, lockout levers, or e-bike controls. The slender design of the ReMote BarCentric allows it to easily fit between the left grip and levers with four potential lever positioning options to avoid any interference with existing levers. This dropper lever has a ring shape that encompasses the handlebar, while also serving as a pivot point to provide the rider with extra leverage, making it easier to press the lever. - Compatible with left side controls including 2x shifters, suspension lockout levers, and under-bar e-bike controls - Large, smooth, sealed Enduro ball bearing that encircles the handlebar - Clean and efficient cable routing flows around disc brake levers - Adjustable reach for ideal ergonomics and controls clearance - Compatible with all cabled actuated dropper posts - Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post - Works with any mountain bike handlebar - Can be rotated to your preferred position

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

Profile Design's aero-bar extensions are made of light and durable 6061 aluminum, come in different bends to suit all riding positions and feature the standard 22.2mm diameter to fit Profile and other brand base bars and extension mounts (base bars and mounts sold separately). The T3+ model has a multi-position drop bend suitable for triathlons and time trials. They also have holes in them for internally routing your cables.

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized - Length: 10m

Campagnolo Cassette Lockrings. - Fits 2000 and newer Campagnolo wheels - Fits all Fulcrum wheels - Fits 1999 Record/Chorus hubs and all Campy hubs 2000-newer - 27.0mm thread OD - For use only with Campagnolo 11-speed cassettes with 12 tooth first position cogs

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

6061 aluminum with precision sealed mechanism bearing and lower (17mm) stack height.

I-SpecBar Clamps are a one-piece hinged clamp adapter that allows users to mount I-Spec compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec brake lever. - Sold individually, the clamp can be mounted to the right or left side - Hinged clamp for easy installation without removing other components - Black Anodized, CNC AL-6061 Aluminum - Compatible only with Shimano I-Spec II compatible shifters or dropper post remotes - 23g

Wheels Manufacturing's SRAM compatible Universal Derailleur Hanger simplifies thousands of hanger designs into one universal standard. Machined completely out of aluminum, this new hanger is not only strong but designed to rotate backward and slip slightly in the case of an impact preventing chain jams and protecting the drive train. All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - Compatible with bike frames designed to accept the SRAM UDH (Universal Derailleur Hanger) - Compatible with all MTB and eMTB drivetrains - Machined aluminum body anodized black - Thru-Axle thread pitch M12 x 1

Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings

Profile Design's Aerobar Bracket Riser Kit lets you customize the height of your Profile aero bar brackets and extensions for finding a perfect riding position. The kit includes two 10mm risers, two 5mm risers and appropriate-length bolts. Multiple kits can be used if you need more height. Note that this kit is not recommended for Profile Design's Carbon Stryke or T-mag bars.

Giant Contact S Type Bar Extensions fit the Giant Connect SL and Contact Clip-On Bar Clamps to provide you with an aerodynamic riding position for triathlon and time trials. Featuring lightweight alloy construction. Features - 22.2mm carbon aerobar extensions - Compatible with 45203-04 Clip-on Aerobar clamp

Giant Contact Ski Type Bar Extensions fit the Giant Connect SL and Contact Clip-On Bar Clamps to provide you with an aerodynamic riding position for triathlon and time trials. Featuring lightweight alloy construction. Features - 22.2mm carbon aerobar extensions - Compatible with 45203-04 Clip-on Aerobar clamp

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application - These hangers do not come with mounting hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA