Brakes/Levers/Pads

Shimano XTR BL-M9100 Race Hydraulic Disc Brake Levers The Shimano engineers have redesigned the XTR 9100 brake levers from a braking system that had been already the benchmark among mountain bike braking systems. For the BL-M9100 levers both the clamp and the lever body itself have been modified. The clamp moves further into the middle of the lever and is angled. This cleverly supports the outer end of the expansion tank directly on the handlebars and creates an additional counter bearing for lever actuation. This significantly increases stiffness and stability, what ultimately leads to an even more direct brake feeling and improved control. So the BL-M9100 is 10% stiffer than its predecessor, too. Of course, the reach of the lightweight XC brake lever with a magnesium housing is individually adjustable. Thanks to the I-Spec EV design the XTR SL-M9100-I shifting levers can be mounted directly to the brake lever. - Brake Lever: BL-M9100 with reach adjustment - Material housing: magnesium - Material lever: Carbon - Compatibility: I-SPEC-EV - Position brake lever: Front Left, Right Rear - Brake Hose: SM-BH90-SS (not included) - Weight: 312g

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

- Brake Lever Actuation: Hydraulic - Hydraulic Hose Length: 1000 (front), 1700 (rear) - Pad Compound: Resin

- Standard replacement cantilever/v-brake bosses

Steel backed disc brake pad with and organic compound. - Fits Zoom Disc Brakes - Steel Back w/ Organic Compound - Qty 1 = enough for 1 wheel

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.

Hope Mono Mini Disc Brake Pads. · Sintered: high-graphite compound; best for wet weather durability · Organic: Softer compound than sintered, works better in dry conditions, but wears faster · Fits Tech and Tech Evo M4 Brakes

The Tectonic brake pad is a forged alloy holder that allows the rider to customize the exact positioning of the friction materials. The friction inserts are designed to interlock together and are secured into the holder on all sides. The Pad-Lock washer system has been improved by incorporating the convex pivot adjustment into the backing plate; thus allowing for the reduction in the number of washers needed to achieve all spacing requirements. The Tectonic pads come with a multi friction compound set up, but single or dual compounds can also be configured. Features: - Aluminum Holder - Integrated Pad-Lock Hardware - Secured End Cap - Interchangeable Compounds - Offset Post - Water Grooves - Available in Threaded and Cantilever (Non-Threaded) Specifications: - Weight per pair: 50.8 grams - Overall length: 73.3 mm - Pad contact width: 9.5 mm

Shimano's XT Ice-Tech rotors utilize their patented Center Lock mounting system for super quick and easy mounting. These rotors use an aluminum core with steel outer plates which reduces the temperature of the braking surface. This means quieter braking, and more importantly, less fade on long downhill sections and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

- High performance compounds recommended for all-conditions - Steel backing

Replacement EBT screws close the bleed port on Magura brakes. - Torque spec: 0.5 nM - T25 head

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

-3XC triple compound cartridge v-brake pad inserts

- Aluminum pad holder with R55C4 pads

Hope X2 2-Piston Disc Brake Pads. • Organic: Softer compound than sintered, works better in dry conditions,but wears faster • Sintered: high-graphite compound; best for wet-weather durability

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Shimano's XT Ice-Tech rotors utilize their patented Center Lock mounting system for super quick and easy mounting. These rotors use an aluminum core with steel outer plates which reduces the temperature of the braking surface. This means quieter braking, and more importantly, less fade on long downhill sections and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

Shimano H03C Metal Disc Brake Pads keep you in control in any conditions with cooling fins for those endless, grin-inducing descents.. - Fits Saint BR-M820 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Aluminum radiator cooling fins increase pad life and reduce brake fade

Shimano A01S Resin Disc Brake Pads - Fits XTR BR-M975/966/965, Saint BR-M800, XT BR-M776/775/765, SLX BR-M665/601, Deore BR-M596/595/585/545/535, Road BR-R505, Alfine BR-S501/500, LX BR-T665/605 calipers - OEM resin pad for XT BR-M775 and SLX BR-M665 calipers - Resin pad with low noise and excellent power modulation - Backing Plate Material: Steel - Compound: Resin - Heat Sink: No - Pad Shape Number: 20

Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

Shimano Mountain brake shoe sets - Mounting hardware included - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: One Piece - Rim Compatibility: Standard

- Economical 3-finger replacement brake levers for basic replacement and repairs - Large 3-finger length blade offers an easy to engage platform and universal practicality - Available for Canti and linear-pull-style brakes

Replacement pads for Hope E4 hydraulic disc brakes.

The Odyssey Evo 2.5 Brake features a wider space to accommodate larger tires. - Forged from aluminum for strength - More clearance for larger tires - Front or rear brake compatible - Includes all necessary hardware

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

- XT-grade 6-bolt rotor - Stainless steel braking surface for long lasting durability - Cutouts help with mud clearing and cooling - Large forged alloy spider supports rotor surface, increasing rigidity and heat dissipation while reducing weight - Comes complete with mounting hardware

-PSLR-O wheelsystem carbon brake pad inserts

- High performance compounds recommended for all conditions - Steel backing